The Chip tuning for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 Racext is a state-of-the-art tuning system that can unleash the full potential of your jet ski. It features exclusive technical solutions, such as the management of the crankshaft phase signal, that make it stand out in the competitive watercraft sector.
With the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module, you can easily and affordably improve the performance of your jet ski without affecting its reliability or durability. The module works directly on the electronic control unit of your watercraft, optimizing the fuel and air mixture for smoother throttle response, better acceleration, and increased torque.

The VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module can also help you save money on gas and reduce your environmental impact by improving the fuel efficiency of your jet ski. By optimizing the combustion process, the module can make your watercraft more eco-friendly and economical
Improving performance on the Boat VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 , until recently, was an expensive and difficult to reverse operation, with the entry on the market of the specific module for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 , things have changed, in fact this add-on module for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 allows us to increase power and torque (depending on the model and condition of the vehicle).
You have a perceived increase in power and therefore your VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 will be smoother with better acceleration and if it does not have the results you want you have 14 days of guaranteed return
The Additional ECU for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 can be used in conjunction with an existing ECU remapping on your bike and will not delete the existing remapping. It can also be used with our or any tuning box and other engine hardware modifications.

Increase the performance of the Boat VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2
CHIP TUNING FOR VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 We suggest that you start using the additional module for Racext with the knob set to minimum and gradually increase the knob until you find the setting that is best for your jet ski. Slightly modified jet skis usually have better performance with the knob set around the middle if the jet ski has an aftermarket.
Tuning VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 Racext When the catalytic converter has been removed, the original standard performance will be at the minimum value on the ECU.
If the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 Racext runs too rich, then the setting must be set between little and minimum.
You will feel the performance of the jet ski when the engine runs smoothly, no need to do a Dyno test.
Installation guide for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module on the IAT sensor of a jet ski
- Locate the IAT sensor on your jet ski. It is usually a two-wire sensor that measures the intake air temperature and sends a signal to the electronic control unit (ECU).
- Disconnect the IAT sensor from the wiring harness. You may need to use a flathead screwdriver to release the clip.
- Connect the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module to the wiring harness using the supplied connectors. Make sure the polarity is correct and the connections are secure.
- Connect the other end of the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module to the IAT sensor using the supplied connectors. Make sure the polarity is correct and the connections are secure.
- Mount the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module in a safe and dry place away from heat and moisture. You can use zip ties or Velcro to secure it.
- Adjust the knob on the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module according to your preference. Start with the minimum setting and gradually increase it until you find the best performance for your jet ski.
- Enjoy your improved power and torque with the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 module.
Note: If you have modified your jet ski with aftermarket parts, such as sport exhaust or air intake, you may need to adjust the knob differently to optimize the fuel and air mixture. If you have removed the catalytic converter, you may need to set the knob to the minimum value to avoid running too rich.
WARNING Please avoid falling into the trap of thinking that the higher the set value, the better the performance.
If it appears that you are losing torque when you get to high speeds this probably means that the ECU value has been set too high and you need to try a lower value.
This is another reason why it is best to start with a low level and gradually raise the knob to the maxmimum setting.
To mount the module on your VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 you will need to locate the air temperature sensor (IAT) which is located near the airbox on most Boat
Disconnect the connectors that are already connected to the IAT and fasten the module connectors for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 to the corresponding connector of the IAT using the branch terminals which make the operation extremely quick and simple. The Upgrade Kit VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 is now ready for use.
You do not find your Boat in our catalog, contact us one of our operators will evaluate the best solution to your needs
REQUEST INFORMATION
We only supply the product with well-indicated codes and specifications, rely on an expert workshop for assembly and choice of the same, we assume no responsibility for errors in the choice or programming of the devices. Warning product not approved for use on the road
the product is covered by a 24 month warranty, in no way does it offer warranties on the car, by purchasing and installing the product the customer assumes full responsibility for any risks or damages. the burden of sending Chi tuning to the parent company for replacements or repairs lies with the customer, who must also provide a specific transit number for the package.
Any returns are allowed within 14 days of purchase.
processing kit VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2
If you see products that cost less than others, but do not have the services listed by us, buy from them we give the services listed and we believe that our price is in line with everything we offer assistance the guarantee, the safety of a product that works covered by return if it does not go well, the delivery by express courier, the continuous and timely assistance of our staff for us are a value on which it makes no sense to save.
How to increase the power on your Boat VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 ?
Try our module, you will be pleasantly surprised, attention an installation other than that indicated in the guide is not the responsibility of this site if the user has not understood the instructions please contact customer service at the email info@Racext.com or at number indicated inside the package
FAQ: IAT Sensor Module for VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2
Q: What is an IAT Sensor Module, and how does it improve my Boat performance?
A: An IAT (Intake Air Temperature) Sensor Module is a device that optimizes the air-fuel ratio in your Boat engine by adjusting the signal from the IAT sensor. This results in improved throttle response, increased horsepower, and better fuel efficiency.
Q: How do I know if the IAT Sensor Module is compatible with my VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 ?
A: Our IAT Sensor Module is specifically designed for the VOLVO PENTA MARINE 200 3.7L 149kW/200HP EDC7C1-C2 . Please check the compatibility before making a purchase.
Q: Is the installation process difficult?
A: The installation process is straightforward, and a guide and assistance from our technicians will be provided with your purchase. We recommend having a basic understanding of Boat mechanics before attempting the installation.
Q: Will the IAT Sensor Module cause any damage to my Boat engine?
A: Our IAT Sensor Module is designed to optimize the air-fuel ratio in your Boat engine, resulting in improved performance and fuel efficiency. It will not cause any damage to your engine if installed correctly.
Q: How long does it take to see the results of the Boat Sensor Module?
A: You should notice improved throttle response and better fuel efficiency immediately after installation.
Q: Can I install the IAT Sensor Module myself, or do I need to take my Boat to a mechanic?
A: The installation process is straightforward and can be done by yourself if you have a basic understanding of Boat mechanics. However, we recommend seeking assistance from a professional mechanic if you’re unsure.
Q: Do you offer a warranty for the IAT Sensor Module?
A: Yes, we offer a two-year warranty on all our products, including the IAT Sensor Module.
Q: What if I have any issues with the IAT Sensor Module after installation?
A: If you experience any issues during or after the installation, please refer to the guide or contact our technical support team for assistance.
Q: How do I purchase the IAT Sensor Module?
A: You can purchase the IAT Sensor Module directly from our website or contact us for more information.








24/7 Customer Service