Chip tuning for Pitster Pro LXR-250F MX EFI power unit – on our site you will find the best spare parts and accessories for cars and motorcycles

Choose free delivery to save more

Chip tuning for Pitster Pro LXR-250F MX EFI power unit

Before purchasing our products, it is advisable to read the product sheet. If in doubt, do not hesitate to contact us, we will be happy to help you choose the product that best suits your needs

If you are looking for high quality products for your car or motorbike, look no further. We are sure you will find the perfect product for you at Racext. Do not hesitate to contact us with any questions or requests. We are here to help you make your vehicle perfect.The Chip tuning for Pitster Pro LXR-250F MX EFI  Racext was developed to be a benchmark in the competitive ATV sector and features cutting-edge technology that enables it to push an ATV to top performance. It includes exclusive technical solutions, such as the management of the crankshaft phase signal, which makes it one of the most advanced tuning systems available for ATVs.

Improving performance on the ATV Pitster Pro LXR-250F MX EFI , until recently, was an expensive and difficult to reverse operation. However, with the introduction of a specific module for the Pitster Pro LXR-250F MX EFI  on the market, things have changed. In fact, this add-on module allows us to increase power and torque (depending on the model and condition of the vehicle), making it easier and more affordable to improve performance on the Pitster Pro LXR-250F MX EFI.

system or any other mechanical part, as it works directly on the electronic control unit of your ATV. This means that you can enjoy a boost in power without compromising the durability or reliability of your machine.

The module is designed to optimize the fuel and air mixture, which results in smoother throttle response, better acceleration, and increased torque. This is especially useful for those who use their ATV for off-roading or towing, as it can make the machine more capable and responsive.

Another benefit of the Pitster Pro LXR-250F MX EFI module is that it can improve the overall fuel efficiency of your vehicle. By optimizing the combustion process, the module can help you save money on gas and reduce your carbon footprint.

If you are not satisfied with the performance of your ATV after installing the module, you have the option to return it within 14 days for a full refund. However, we are confident that you will be satisfied with the results and the added power and efficiency it provides.

It is important to note that the Pitster Pro LXR-250F MX EFI module is not a replacement for regular maintenance and upkeep of your ATV. You should still follow the manufacturer s recommended service intervals and keep your machine in good condition to ensure optimal performance and longevity.

In conclusion, if you want to give your Pitster Pro LXR-250F MX EFI a boost in power and efficiency without sacrificing its reliability, the module is a great investment. With its easy installation process and 30-day money-back guarantee, you have nothing to lose and everything to gain.

The Benefits of Purchasing an Additional IAT Sensor Module for Pitster Pro LXR-250F MX EFI

Purchasing an additional module for your ATV IAT sensor may seem like an unnecessary expense, but it can actually bring several advantages that could make a difference during your off-road excursions. In particular, the additional module for the IAT sensor on the Pitster Pro LXR-250F MX EFI ATV offers numerous benefits that are worth considering.

The IAT (Intake Air Temperature) sensor is a vital component of your ATV fuel injection system. This sensor is responsible for detecting the temperature of the air entering the engine and sending this information to the engine control unit, which in turn adjusts the amount of fuel that is injected based on the air temperature. With an additional module for the IAT sensor, it is possible to improve engine performance and efficiency.

One of the main advantages of purchasing an additional module for the IAT sensor on the Pitster Pro LXR-250F MX EFI ATV is improved engine performance. The additional module can improve engine response and acceleration, giving the driver greater power during off-road driving. Additionally, the additional module can improve engine torque, making it easier to tackle difficult and steep terrain.

Another advantage of using an additional module for the IAT sensor on the Pitster Pro LXR-250F MX EFI  is improved fuel efficiency. The additional module can optimize the amount of fuel that is injected into the engine based on the air temperature, making the engine more efficient. This means that the driver can enjoy a longer driving experience with a fuel tank, which is particularly important for off-road excursions.

Finally, the additional module for the IAT sensor on the Pitster Pro LXR-250F MX EFI can help protect the engine. With better fuel injection control, the engine can operate more efficiently and with less strain, which means it could last longer. Additionally, the additional module can protect the engine from any damage caused by excessively high or low intake air temperatures.

In summary, purchasing an additional module for the IAT sensor on the Pitster Pro LXR-250F MX EFI can bring numerous advantages that are worth considering. These include improved engine performance, increased fuel efficiency, and greater engine protection. If you are passionate about off-road driving, an additional module for the IAT sensor could make a difference during your off-road adventures.

Increase the performance of the motorcycle ATV Pitster Pro LXR-250F MX EFI

CHIP TUNING FOR Pitster Pro LXR-250F MX EFI

If you are the proud owner of a ATV, we highly recommend that you enhance your riding experience by adding an additional module to your ATV. This additional module will improve the performance of your vehicle by optimizing its fuel and ignition systems.

To get the most out of your ATV and the additional module, it’s important to start with the knob set to the smallest setting. This will allow you to gradually increase the knob until you find the setting that works best for your ATV.

Keep in mind that if your Pitster Pro LXR-250F MX EFI has been modified with aftermarket parts, such as a sport exhaust or air cleaner, it may perform better with the ring set around the middle. This will allow your ATV to take advantage of the added airflow provided by these upgrades.

Whether you use your ATV for work or play, investing in an additional module can make a significant difference in its performance. With the right settings, you can expect improved acceleration, better throttle response, and increased power.

However, before making any modifications to your ATV, it’s important to ensure that they are legal and comply with any regulations in your area. Some modifications may not be permitted on public roads or trails, so it’s always best to check before making any changes.

In addition to the performance benefits, adding an additional module to your ATV can also improve its fuel efficiency. This is especially important for those who use their Pitster Pro LXR-250F MX EFI for work, as it can help to reduce fuel costs and increase productivity.

Overall, investing in an additional module for your pitster ATV is a smart choice for anyone looking to improve their riding experience. With the right settings and modifications, you can take your ATV to the next level and enjoy all that it has to offer.

Processing Pitster Pro LXR-250F MX EFI

When the catalytic converter has been removed from your ATV, it can greatly affect the performance of your Pitster Pro LXR-250F MX EFI. This is because the catalytic converter plays a key role in reducing harmful emissions from the engine. Without it, the original standard performance of your ATV will be significantly impacted and the engine may not run as smoothly as it should.

To ensure that your ATV is still performing optimally after removing the catalytic converter, it s important to make some adjustments to the settings. If your ATV is running too rich, you will need to adjust the settings to ensure that it s not using too much fuel. This can be done by setting the ATV to a little above the minimum value on the ECU.

It s important to note that adjusting the settings of your ATV can be a delicate process and should only be done by someone with experience in this area. If you re unsure about how to adjust the settings, it s best to consult with a professional mechanic or technician who can guide you through the process.

Once your ATV is running smoothly, you will notice a significant improvement in performance. However, it’s always a good idea to perform regular maintenance on your vehicle to ensure that it continues to run smoothly over time. This includes regular oil changes, tune-ups, and other necessary repairs.

In summary, removing the catalytic converter from your ATV can affect its performance, but with the right adjustments, you can still enjoy a smooth and powerful ride. It’s important to take the necessary steps to ensure that your ATV is running optimally and to seek professional help if you’re unsure about how to make these adjustments.

WARNING Please avoid falling into the trap of thinking that the higher the set value, the better the performance.

If you appear to be losing torque at high speeds, this indicates that the ECU value has been set too high and you should try a lower value.

Another reason to start with a low level and gradually raise the knob to the maximum setting.

To install the module on your Pitster Pro LXR-250F MX EFI, locate the air temperature sensor (IAT), which is usually located near the airbox on most motorcycles.

Connect the module connectors for Pitster Pro LXR-250F MX EFI  to the corresponding connector of the IAT using the branch terminals, which make the operation extremely quick and simple. The Upgrade Kit Pitster Pro LXR-250F MX EFI is now operational.

How to Install our IAT Sensor Module on the Pitster Pro LXR-250F MX EFI: A Detailed Guide

Thank you for purchasing our IAT Sensor Module for your Pitster Pro LXR-250F MX EFI ATV. This module will improve the performance and fuel efficiency of your vehicle by optimizing the air-fuel ratio. In this article, we will provide a detailed guide on how to install the module on your ATV. Please note that a guide and assistance from our technicians will be provided with your purchase.

Before we begin, here are some important points to keep in mind:

• Make sure the Pitster Pro LXR-250F MX EFI  is turned off and the key is removed before starting the installation.
• Ensure that the module is compatible with your   before proceeding with the installation.
• We recommend having a basic understanding of ATV mechanics before attempting this installation. If you’re unsure, seek assistance from a professional mechanic.

Step-by-Step Installation Guide:

1. Locate the IAT sensor on your ATV. It’s typically found near the airbox or the air intake manifold.
2. Disconnect the IAT sensor by gently unplugging the connector from the sensor.
3. Connect the IAT Sensor Module in between the IAT sensor and its connector. Make sure the connections are secure.
4. Mount the module securely to a suitable location on the ATV using the supplied zip ties. Avoid mounting the module near sources of excessive heat or moisture.
5. Finally, reconnect the IAT sensor connector to the module.
6. Double-check all connections and ensure that the module is mounted securely.
7. Turn on the ATV and let it idle for a few minutes to allow the module to calibrate itself.
8. Take the ATV for a test ride and monitor its performance. You should notice improved throttle response and better fuel efficiency.
9. If you experience any issues during or after the installation, please refer to the guide or contact our technical support team for assistance.

In conclusion, installing our IAT Sensor Module on your Pitster Pro LXR-250F MX EFI is a simple and effective way to improve your vehicle’s performance and fuel efficiency. By following the steps outlined in this guide and with the help of our technicians, you can install the module with confidence and enjoy the benefits of a more optimized air-fuel ratio.

You do not find your ATV in our catalog, contact us one of our operators will evaluate the best solution to your needs
REQUEST INFORMATION

We only supply the product with clearly indicated codes and specifications, rely on an expert workshop for assembly and selection, and accept no responsibility for errors in device selection or programming. Warning: This product is not roadworthy.

The product is covered by a 24-month warranty; however, no warranties are offered on the car; by purchasing and installing the product, the customer assumes full responsibility for any risks or damages. The customer is responsible for sending Chi tuning to the parent company for replacements or repairs, and must also provide a specific transit number for the package.

Returns are permitted within 14 days of purchase.

processing kit Pitster Pro LXR-250F MX EFI

If you see products that cost less than others but do not have the services listed by us, buy from them. We provide the services listed and believe that our price is in line with everything we offer assistance, the guarantee, the safety of a working product covered by return if it does not go well, the delivery by express courier, the continuous and timely assistance of our staff.

How to increase the power on your Pitster Pro LXR-250F MX EFI ?

Try our module, you will be pleasantly surprised. Please keep in mind that any installation other than that specified in the guide is not the responsibility of this site. If the user does not understand the instructions, please contact customer service at info@Racext.com or the phone number provided in the package.

FAQ: IAT Sensor Module for Pitster Pro LXR-250F MX EFI

Q: What is an IAT Sensor Module, and how does it improve my ATV’s performance?

A: An IAT (Intake Air Temperature) Sensor Module is a device that optimizes the air-fuel ratio in your ATV’s engine by adjusting the signal from the IAT sensor. This results in improved throttle response, increased horsepower, and better fuel efficiency.

Q: How do I know if the IAT Sensor Module is compatible with myPitster Pro LXR-250F MX EFI?

A: Our IAT Sensor Module is specifically designed for the Pitster Pro LXR-250F MX EFI model. Please check the compatibility before making a purchase.

Q: Is the installation process difficult?

A: The installation process is straightforward, and a guide and assistance from our technicians will be provided with your purchase. We recommend having a basic understanding of ATV mechanics before attempting the installation.

Q: Will the IAT Sensor Module cause any damage to my ATV’s engine?

A: Our IAT Sensor Module is designed to optimize the air-fuel ratio in your ATV’s engine, resulting in improved performance and fuel efficiency. It will not cause any damage to your engine if installed correctly.

Q: How long does it take to see the results of the IAT Sensor Module?

A: You should notice improved throttle response and better fuel efficiency immediately after installation.

Q: Can I install the IAT Sensor Module myself, or do I need to take my ATV to a mechanic?

A: The installation process is straightforward and can be done by yourself if you have a basic understanding of ATV mechanics. However, we recommend seeking assistance from a professional mechanic if you’re unsure.

Q: Do you offer a warranty for the IAT Sensor Module?

A: Yes, we offer a two-year warranty on all our products, including the IAT Sensor Module.

Q: What if I have any issues with the IAT Sensor Module after installation?

A: If you experience any issues during or after the installation, please refer to the guide or contact our technical support team for assistance.

Q: How do I purchase the IAT Sensor Module?

A: You can purchase the IAT Sensor Module directly from our website or contact us for more information.

RACEXT QUALITY GUARANTEE

Every Racext performance product is thoroughly tested and guaranteed, even if it doesn’t feature a visible logo. Due to production and logistical reasons, some products may not carry the Racext branding directly on the item.

However, rest assured that all our products undergo rigorous quality checks and are backed by Racext’s commitment to performance and reliability.

EXCLUSIVE MANUFACTURING AND DISTRIBUTION

Our trusted partners manufacture each product according to our specific technical requirements, ensuring that every item meets Racext’s high standards. All our products are exclusively sold by Racext and are not distributed by other companies.

Even though some of our partners commercialize similar products for cars, these items are not compatible with motorcycles due to distinct resistance and amperage requirements.

PRECISION-CALIBRATED CHIP TUNING DEVICES

When it comes to our chip tuning devices, the resistance is precisely calibrated to be perfectly adapted to different vehicles, such as motorcycles. This ensures optimal performance, compatibility, and a smooth ride without any risk to your vehicle’s electronic systems.

Racext chip tuning devices are specially designed to meet the unique demands of motorcycle performance systems, guaranteeing that your bike runs efficiently and reliably.

QUALITY STANDARDS ACROSS ALL PRODUCTS

This high standard of exclusive design, manufacturing, and compatibility applies to all Racext products available for purchase. Every item in our catalog is crafted with the same dedication to performance, safety, and quality.

PERFORMANCE YOU CAN TRUST, QUALITY YOU CAN SEE

Disclaimer 

TRANSPARENT SHIPPING POLICY

Cutoff time 22:00 (GMT+01:00) Central European Standard Time (Amsterdam)
Order Processing Time 1-3 days (Mon-Fri)
Delivery time 3-6 days (Monday-Friday)

Our orders are free of shipping costs.

We use the following shipping couriers:

• PostNL
• Dhl
• UPS
• DPD
• Cainiao

The customer will receive the tracking information in 1-3 days directly in his email. Please contact us if you have not received the email or check your spam emails

LEGAL DISCLAIMER: PRODUCTS INTENDED EXCLUSIVELY FOR SPORTING AND COMPETITIVE USE

Important: Before proceeding with the purchase or use of our sport exhausts, please read the following notice carefully.

The products sold through this website are intended exclusively for sporting and competitive use. This means they have been designed and manufactured to be used in controlled environments, such as closed circuits or areas designated for sporting competitions, where emission and noise regulations may differ from those applied on public roads.

Public Road Use Not Allowed: It is emphasized that the installation and use of these devices on vehicles intended for circulation on public roads may not be permitted under the laws of your reference country regarding emission and noise regulation, as they are not designed for road use but for sporting use.

Buyer’s Responsibility: It is the buyer’s responsibility to ensure that the use of the purchased products complies with all applicable laws and regulations. The buyer assumes all legal liabilities for any non-compliant use of the products, including the installation and operation of such devices on unauthorized vehicles or in ways that violate applicable laws.

By continuing with the purchase, the buyer acknowledges and agrees that the use of the products is limited to sporting and competitive contexts as defined above and assumes full responsibility for any legal consequences arising from improper use of the products.

Chip tuning for Pitster Pro LXR-250F MX EFI power unit

Compatibility:

It is the responsibility of the customer to ensure that the product is compatible with their vehicle. We recommend consulting with a professional mechanic before purchasing to confirm compatibility. Racext is not responsible for any issues that may arise from the use of our products, including but not limited to damage to the vehicle or personal injury.

Warranty:

All of our products come with a 2-year warranty in accordance with international standards. If you experience any issues with your product within the warranty period, please contact us for assistance. The warranty does not cover damages caused by improper installation, misuse, or external factors such as accidents or natural disasters.

Returns

ABOUT US

ADDRESS: Creative Tower – Hamad Bin Abdulla Road – Office 4201 – Fujairah – U.A.E.

E-mail : info@Racext.com

Contact form : Get in touch

Phone : +971 58 859 1706

Company name : Digitanow International group FZe

Company Number : AE18048/2020

Tax registration number: AE18048 2020

Customer service : Monday to Friday from 9 a.m. to 8 p.m.

Terms and Conditions

This website provides only the product with well-indicated codes and specifications. Please rely on an experienced workshop for the installation and choice of the product. We do not assume any responsibility for errors in choice, installation, or programming of the devices.

*The price is intended for a single product

*Days are always working days

All guides on this website are for illustrative purposes only. For many products, the use of special tools may be necessary. We always recommend seeking the advice of a specialized repair center for the selection and installation or programming of products purchased anywhere. We do not assume any responsibility for damage to property or persons, or user errors in the application of a guide on this website or for any other occurrence.

Product is not original but fully interchangeable with it

All rights reserved. All trade names and logos are registered trademarks of the respective manufacturers indicated

The trademarks mentioned on this site are the exclusive property of the automotive companies and are used here exclusively to facilitate the search for vehicles by our customers. We do not assume any responsibility for damages to property or persons, or user errors in the application of a guide on this website or for any other occurrence.

Secure Payments

When making purchases on our website, you can be confident that your transaction is secure. All financial transactions are processed on the secure and certified servers of PayPal or Stripe. These platforms allow us to accept payments from all VISA, VISA ELECTRON, MAESTRO, POSTEPAY, AMERICAN EXPRESS, AURA, and DISCOVER credit cards.

Quality Guarantee

Choose safety, savings, and professionalism by choosing us. We offer top-level customer support that will never leave you alone during the pre- and post-purchase phases. We offer top-quality products and intelligent, secure savings. Don’t trust inexperienced sellers.

NOTE: In the event that the product is not available in stock, we reserve the right to issue a full and immediate refund.